 |
|
|
|
|
|
|
|
|
| |
 |
| |
|
| |
| General specifications : |
|
Digital Stereo Generator : |
Frequency response : +0 / - 0.4dB, 10-20000Hz (Bypass mode).
System distortion : < 0.01% THD, de-emphasised.
Signal to Noise : 92 dB unweighted, 20 Hz - 20 kHz
I/O Delay : ~ 6 milliseconds
Internal sample rate : 96 kHz
Internal resolution : 40 bit floating point
I/O resolution : 24 bit
Maximum Overshoot : 0.1 dB
Phase Response : Linear 20 Hz - 20 kHz
Process Architecture : Band process
Structure : 1APP (One Advanced Point Processing)
DSP : 10 Sharc 21065, expandable to 66 DSP.
Maximum number of Factory Presets : 32
Maximum number of User Presets : 64
Remote contact closure : 14 Presets |
|
Frequency Response : +/- 0.1 dB 20Hz - 15kHz
Configuration : Two independently controlled output
Source impedance : 75 ohms
Load impedance : 75 ohms or grater
Level : Ajustable max 15 Vpp (100% modulation ~ -3 dBFS)
Connector : BNC
Pre-emphasis : 50 or 75µs
Stereo separation : More than 90dB, 20Hz - 15kHz
Main to Sub crosstalk, Sub to Main crosstalk : < -85 dB
Audio filtering : 80 dB rejection at 19kHz
Pilot stability : +/- 0,2 Hz
Pilot Output 19 kHz : 1 BNC
Sub-carrier : Two BNC input |
|
|
|
|
|
| |
| Analogue audio input : |
|
| Digital sync I / O : |
Configuration : Two mode, input to provide sync, Output to deliver sync
Impedance : 75 ohms
Sampling Rate for Input mode : 32, 44.1, 48, 96khz
Sampling Rate for Output mode : Software selectable, 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Connector : BNC female. |
| |
| RDS : (optionally) |
Basic RDS/RDBS : PI, PS, AF, PTY, RT, RTC
|
| |
| Remote computer interface : |
Configuration : Two RS 232
Connector : One Sub-D 9 pin female and one Sub-D 9 pin male
Baud rate : Auto selectable baud rate 9600 to 115200 bauds |
| |
| Remote control : |
CConfiguration : Fully remote controllable by external modem or TCP/IP (optional).
Rate : 9600 to 115200 bauds
|
| |
| Local Switch GPI/O : |
Configuration : 14 inputs contact closure
Control : 14 users presets directly selectable by software |
| |
| Power : |
Voltage : 80 to 265 VAC, 50 - 60 Hz, 130 VA
Connector : IEC, EMI-suppressed
Safety Standard : CE / DBT
|
| |
| Environmental and imensions : |
Operating Temperature : 0° à 50° C or 32° to 122° F
Humidity : 0 to 95% RH, no condensing
Size : 19'', Two rack unit high. (W x H x D) : 48,3 x 8.9 x 40 cm - 19 x 3.5 x 15.7''
Weight : 6 Kg - 13.2 lb.
|
|
Configuration : Stereo
Impedance : > 6 kOhms
Type : Electronically balanced
Maximun Input Level : +25 dBu, for THD + N < 0.01%
Equivalent Input Noise : < - 84 dBu
Common Mode Rejection Ratio: 90 dB
Connector : two XLR female
A/D Conversion : 24 bit 128X oversampled |
|
| |
|
| Analogue audio output : |
|
Configuration : Stereo
Source impedance : < 1 Ohms
Type : Electronically balanced
Maximum Output Level :
+24 dBu, on 10 kOhms Load for THD + N < 0.01 %
+18 dBu on 600 Ohms Load for THD + N < 0.05 %
Signal to Noise : > 100 dB unweighted, 20 Hz - 20 kHz
Connector : Two XLR male
DA Conversion : 24 bit 128X oversampled |
|
| |
|
| Digital audio input : |
|
Configuration : Stereo per AES/EBU (AES3), 16, 18, 20 or 24 bit resolution.
Impédance : 110 ohms
Sample Rate : 32, 44.1, 48, 96kHz autodetect
Status bits : Input channel status is decoded for control. Input user bits are optionally passed trough the output.
Connector : XLR female, EMI-suppressed
Filtering : RFI filters. BW : 0.5-200MHz
|
|
| |
|
| digital audio output : |
|
Configuration : Stereo per AES/EBU (AES3), 20 or 24 bits resolution.
Impedance : 110 ohms
Sampling Rate : Software selectable, free running at 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Synchronisation mode : Internal free running or external or delivery mode for 32, 44.1, 48, 96khz
Word Lengh : Selectable 18, 20, 24 bits.
Jitter : Less than 5 ns rms.
Status bits : Output chanel status can be generated. Input User bits are optionally passed through the output
Connecteur : XLR male, EMI-suppressed
Filtrage : filtres RFI. BP : 0.5-200MHz |
|
|
| |
|
|
|
|
