HOME PRODUCTS DOWNLOADS SUPPORT DISTRIBUTORS COMPANY CONTACT
 
   General
   Functions
   Plug-ins (option)
   Specifications
   Documentations
 
   
 
 General specifications :    Digital Stereo Generator :
Frequency response : +0 / - 0.4dB, 10-20000Hz (Bypass mode).
System distortion : < 0.01% THD, de-emphasised
Signal to Noise : 92 dB unweighted, 20 Hz - 20 kHz
I/O Delay : ~5 milliseconds
Internal sample rate : 96 kHz
Internal resolution : 40 bit floating point
I/O resolution : 24 bit
Maximum Overshoot : 0.1 dB
Phase Response : Linear 20 Hz - 20 kHz
Process Architecture : Wide band AGC / 2 band Process / 2 band limiter / Final limiter APC® overdrived
DSP : 6 Sharc 21065,
Maximum number of Factory Presets : 30
Maximum number of User Presets : 60
Remote contact closure : 10 Presets
Compact Flash memory slot
 
Frequency Response : +/- 0.1 dB 20Hz - 15kHz
Configuration : Two independently controlled output
TX1 : Multiplex signal
TX2 : Programmable (multiplex or 19 kHz)
Source impedance : 75 ohms
Load Impedance : 75 ohms or greater
Level : Adjustable max 15 Vp-p (100% modulation ~ -3 dBFS) Connector : BNC
Pre-emphasis : 50 or 75µs
Stereo separation : More than 90dB, 20Hz - 15kHz Main to Sub crosstalk, Sub to Main crosstalk : < -85 dB
Audio Filtering : 80 dB rejection at 19kHz
Pilot stability : +/- 0,2 Hz
   
 
 Analogue audio input :  
 Digital sync I / O :
Configuration : Deux modes, l’entrée reçoit la synchro, la sortie délivre la synchro.
Impédance : 75 ohms
Fréquence d'échantillonnage en mode “entrée” : 32, 44.1, 48, 96 kHz
Fréquence d'échantillonnage en mode “sortie” : sélection par logiciel, 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Connecteur : BNC femelle,
 
 RDS / RDBS : (optionally)
Basic RDS/RDBS : PI, PS, AF, PTY, RT, RTC
Dynamic RDS/RDBS : via port data UECP (Universal Encoder
Communication Protocol)
Data port : RS232 manual selection baud rate 9600 to 115200
 
 Remote computer interface :
Configuration : Two RS 232
Connector : One Sub-D 9 pin female and one Sub-D 9 pin male on the back side and one Sub-D 9 pin female on the front panel
Baud rate : Auto selectable baud rate 9600 to 115200 bauds
 
 Remote control :
Configuration : Fully remote controllable by external modem or with the TCP/IP option
Rate : 9600 to 115200 baud
 
 Local Switch GPI/O :
Configuration : 16 inputs and 6 outputs software controlable
 
 Memory slot :
Type : Compact flash
Configuration : 1 slot for save , recall and upgrade facilities
 
 Power :
Voltage : 80 to 265 VAC, 50 - 60 Hz, 130 VA
Connector : IEC, EMI-suppressed
Safety Standard : CE / DBT
 
 Environmental and dimensions :
Operating Temperature : 0° to 50° C or 32° to 122° F
Humidity : 0 to 95% RH, non condensing
Size : 19'', One rack unit high.
Weight : 6 Kg - 13.2 lb.
Configuration : Stereo
Impedance : > 6 kOhms
Type : Electronically balanced
Maximum Input Level : +25 dBu, for THD + N < 0.01%
Equivalent Input Noise: < - 84 dBu
Common Mode Rejection Ratio: 90 dB
Connector : Two XLR female
AD Conversion : 24 bit 128X oversampled
 
   
 Analogue audio output :  
Configuration : Stereo
Source impedance : < 1 Ohms
Type : Electronically balanced
Maximum Output Level :
+24 dBu, on 10 kOhms Load for THD + N < 0.01 %
+18 dBu on 600 Ohms Load for THD + N < 0.05 %
Signal to Noise : > 100 dB unweighted, 20 Hz - 20 kHz
Connector : Two XLR Male
DA Conversion : 24 bit 128X oversampled
 
   
 Digital audio input :  
Configuration : Stéréo sur AES/EBU (AES3), résolution de 16, 18, 20 ou 24 bits
Impédance : 110 Ohms
Fréquence d'échantillonage : 32, 44.1, 48, 96 kHz auto détecté
Bits statut : l'état du canal d'entrée est décodé pour contrôle.
Connecteur : XLR femelle, EMI-suppressed
Filtrage : Filtres RFI, B.P. : 0.5-1000 MHz
 
   
 Digital audio output :  
Configuration : Stereo per AES/EBU (AES3), 16, 18, 20 or 24 bit resolution.
Impedance : 110 ohms
Sampling Rate : 32, 44.1, 48, 96kHz autodetect
Status bits : Input channel status is decoded for control. Input User bits are optionally passed through the output
Connector : XLR female, EMI-suppressed
Filtering : RFI filtered. Effective 0.5-1000MHz