 |
|
|
|
|
|
|
|
|
| |
 |
| |
|
| |
| General specifications : |
|
Digital stereo generator : |
Frequency response: +0 / -0.4 dB, 10-20000 Hz (In bypass mode).
Distorsion : < 0.01% THD, mode de-accentuated
Signal-to-noise ratio: 92 dB unweighted, 20 Hz - 20 kHz
Délay E/S : ~3 ms
Internal samplerate : 96 kHz
INternal résolution : 40 bit floating point
I/O resolution: 24 bit
Maximum overshot: 0.1 dB
Phase response: Linear 20 Hz - 20 kHz
Architecture of the processor : wide band AGC / limiter final technologie APC®
DSP : 4 Sharc 21065
Max. number of factory presets : 10
Max. Number of user presets : 10
Remote contact closure: 8 inputs et 12 outputs |
|
Frequency Response : +/- 0.1 dB 20Hz - 15kHz
Configuration : Two independently controlled output
TX1 : Multiplex signal
TX2 : Programmable (multiplex or 19 kHz)
Source impedance : 75 ohms
Load Impedance : 75 ohms or greater
Level : Adjustable max 15 Vp-p (100% modulation ~ -3 dBFS) Connector : BNC
Pre-emphasis : 50 or 75µs
Stereo separation : More than 90dB, 20Hz - 15kHz Main to Sub crosstalk, Sub to Main crosstalk : < -85 dB
Audio Filtering : 80 dB rejection at 19kHz
Pilot stability : +/- 0,2 Hz |
|
| |
|
|
| |
| Analogue audio input: |
|
| RDS / RDBS : (optional) |
Basic RDS/RDBS : PI, PS, AF, PTY, RT, RTC
Dynamic RDS/RDBS : via port data UECP (Universal Encoder
Communication Protocol)
Data port : RS232 manual selection baud rate 9600 to 115200 |
| |
| Remote computer interface : |
Configuration : Two RS 232
Connector : One Sub-D 9 pin female and one Sub-D 9 pin male on the back side and one Sub-D 9 pin female on the front panel
Baud rate : Auto selectable baud rate 9600 to 115200 bauds |
| |
| Remote control : |
Configuration : Fully remote controllable by external modem or with the TCP/IP (optional)
Rate : 9600 to 115200 baud
|
| |
| Local Switch GPI/O : |
Configuration : 8 inputs and 12 outputs software controlable |
| |
| Power supply : |
Voltage : 80 to 265 VAC, 50 - 60 Hz, 130 VA
Connector : IEC, EMI-suppressed
Safety Standard : CE / DBT |
| |
| Environmental and Dimensions : |
Operating Temperature : 0° to 50° C or 32° to 122° F
Humidity : 0 to 95% RH, non condensing
Size : 19'', One rack unit high.
Weight : 6 Kg - 13.2 lb. |
|
Configuration : Stereo
Impedance : > 6 kOhms
Type : Electronically balanced
Max. input level : +25 dBu, with THD + N < 0.01%
Equivalent input noise: < - 84 dBu
Common mode réjection ration : 90 dB
Connector : Two XLR female
A/D conversion: 24 bits 128X oversampled |
|
| |
|
| Digital audio input : |
|
Configuration : Stereo per AES/EBU (AES3), 16, 18, 20 or 24 bit resolution.
Impedance : 110 ohms
Sampling Rate : 32, 44.1, 48, 96kHz autodetect
Status bits : Input channel status is decoded for control. Input User bits are optionally passed through the output
Connector : XLR female, EMI-suppressed
Filtering : RFI filtered. Effective 0.5-1000MHz |
|
| |
|
| Digital audio output : |
|
Configuration : Stereo per AES/EBU (AES3), 20 or 24 bits resolution.
Impedance : 110 ohms
Sampling Rate : Software selectable , free running at 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Synchronisation mode : Internal free running or external or delivery mode for 32, 44.1, 48, 96khz
Word Length : Selectable 18, 20, 24 bits.
Jitter : Less than 5 ns rms.
Status bits : Output channel status can be generated.
Input User bits are optionally passed through the output
Connector : XLR female, EMI-suppressed
Filtering : RFI filtered. Effective 0.5-1000MHz |
|
| |
|
| Digital I/O synchronisation : |
|
Configuration : Two mode, input to provide sync, Output to deliver sync
Impedance : 75 ohms
Sampling Rate for Input mode : 32, 44.1, 48, 96khz Sampling Rate for Output mode : Software selectable , 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Connector : BNC female, |
|
|
| |
|
|
|
|
