 |
|
|
|
|
|
|
|
|
| |
 |
| |
|
| |
| General specifications: |
|
Digital audio output : |
General specifications :
Frequency response : +0 / - 0.4dB, 10-20000Hz (Bypass mode).
System distortion : < 0.01% THD, de-emphasised
Signal to Noise : 92 dB unweighted, 20 Hz - 20 kHz
I/O Delay : ~3 milliseconds
Internal sample rate : 96 kHz
Internal resolution : 40 bit floating point
I/O resolution : 24 bit
Maximum Overshoot : 0.1 dB
Phase Response : Linear 20 Hz - 20 kHz
Process Architecture : FFT (Fast Fourier Transform)
DSP : 4 Sharc 21065,
High pass filter, ajustable from 0 to 150 Hz
Maximum number of Factory Presets : 30
Maximum number of User Presets : 60
Remote contact closure : 24 inputs
Compact Flash memory slot |
|
Configuration : Stereo per AES/EBU (AES3), 20 or 24 bits resolution.
Impedance : 110 ohms
Sampling Rate : Software selectable , free running at 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Synchronisation mode : Internal free running or external or delivery mode for 32, 44.1, 48, 96khz
Word Length : Selectable 18, 20, 24 bits.
Jitter : Less than 5 ns rms.
Status bits : Output channel status can be generated.
Input User bits are optionally passed through the output
Connector : XLR female, EMI-suppressed
Filtering : RFI filtered. Effective 0.5-1000MHz |
|
| |
|
|
| |
| Analogue microphone input: |
|
| Digital Sync I / O : |
Configuration : Two mode, input to provide sync, Output to deliver sync
Impedance : 75 ohms
Sampling Rate for Input mode : 32, 44.1, 48, 96khz Sampling Rate for Output mode : Software selectable , 32kHz +/- 10 PPM, 44.1kHz +/- 10 PPM, 48kHz +/- 10 PPM, 96kHz +/- 10 PPM.
Connector : BNC female, |
| |
| Remote computer interface : |
Configuration : Two RS 232
Connector : One Sub-D 9 pin female and one Sub-D 9 pin male on the back side and one Sub-D 9 pin female on the front panel
Baud rate : Auto selectable baud rate 9600 to 115200 bauds
|
| |
| Remote control : |
Configuration : Fully remote controllable by external modem or with the TCP/IP option
Rate : 9600 to 115200 baud
|
| |
| Local Switch GPI : |
Configuration : 24 inputs software controlable |
| |
| Memory card slot : |
Type : Compact flash
Configuration : 1 slot for save , recall and upgrade facilities |
| |
| Power : |
Voltage : 80 to 265 VAC, 50 - 60 Hz, 130 VA
Connector : IEC, EMI-suppressed
Safety Standard : CE / DBT |
| |
| Environmental and Dimensions : |
Operating Temperature : 0° to 50° C or 32° to 122° F
Humidity : 0 to 95% RH, non condensing
Size : 19'', One rack unit high.
Weight : 6 Kg - 13.2 lb. |
|
Configuration : Mono
Impedance : > 1,5 kOhms
Type : Balanced on transformer
Mic pre-amplifier : Ajustable from -40 dB to -70 dB
Equivalent Input Noise: < - 120 dBu
Common Mode Rejection Ratio: 90 dB
Connector : One XLR female
AD Conversion : 24 bit 128X oversampled |
|
| |
|
| Analogue line input: |
|
Configuration : Mono
Impedance : > 6 kOhms
Type : Electronically balanced
Maximum input level : +25 dBu, for THD + N < 0,01%
Equivalent input noise : < - 84 dBu
Commun Mode Rejection Ratio : 90 dB
Connector : One XLR female
AD Conversion : 24 bit 128X oversampled |
|
| |
|
| Analogue audio output: |
|
Configuration : Stereo
Source impedance : < 1 Ohms
Type : Electronically balanced
Maximum Output Level :
+24 dBu, on 10 kOhms Load for THD + N < 0.01 %
+18 dBu on 600 Ohms Load for THD + N < 0.05 %
Signal to Noise : > 100 dB unweighted, 20 Hz - 20 kHz
Connector : Two XLR Male
DA Conversion : 24 bit 128X oversampled |
|
| |
|
| Digital audio input : |
|
Configuration : Stereo per AES/EBU (AES3), 16, 18, 20 or 24 bit resolution.
Impedance : 110 ohms
Sampling Rate : 32, 44.1, 48, 96kHz autodetect
Status bits : Input channel status is decoded for control. Input User bits are optionally passed through the output
Connector : XLR female, EMI-suppressed
Filtering : RFI filtered. Effective 0.5-1000MHz |
|
|
| |
|
|
|
|
